Filmtec SW30HRLE-400 Seawater Membrane
FilmTec™ SW30HRLE-400 Elements menawarkan penolakan dan total biaya air yang rendah untuk desalinasi air laut. FilmTec SW30HRLE-400 memberikan kinerja tinggi selama masa operasi tanpa menggunakan pasca perawatan oksidatif dan memberikan penolakan NaCl dan boron yang tinggi untuk membantu memenuhi standar Organisasi Kesehatan Dunia (WHO) dan air minum lainnya.
FilmTec™ Wet Seawater Reverse Osmosis 8" Elements dapat memisahkan garam dari air dan dirancang untuk mengurangi modal dan biaya operasional sistem desalinasi besar yang menghasilkan lebih dari sekitar 10 gpm (2300 L/h) permeat. Dengan berbagai macam membran yang tersedia untuk memenuhi berbagai persyaratan desain sistem, produk RO kami menggabungkan kualitas membran yang sangat baik dengan fabrikasi presisi otomatis, membawa kinerja sistem ke tingkat yang belum pernah terjadi sebelumnya.
FilmTec™ offers various premium seawater reverse osmosis (RO) elements designed to reduce capital and operation cost of seawater RO systems. FILMTEC™ products combine premium membrane performance with automated precision fabrication and maximize system output to unprecedented performance.
FILMTEC SW30HR LE-400 element (named FILMTEC SW30HR LE-380 until June 2004) offers very high productivity and rejection, enabling the lowest total cost of water for seawater desalination. Benefits of FILMTEC SW30HR LE-400 :
Enables systems to be designed and operated to optimize operating cost through lower energy consumption or to optimize capital cost through higher productivity at lower operating fluxes. Highest NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards. Can effectively be used in permeate staged seawater desalination systems without impairing the performance of the downstream stage. High performance over the operating lifetime without the use of oxidative post-treatments many competitive products. This is one reason FILMTEC elements are more durable and may be cleaned more effectively over a wider pH range (1-13) than other RO elements. Automated, precision fabrication with a greater number of shorter membrane leaves reduces the effect of overall fouling and maximizes element efficiency, lowering your cost of operation.
Product Data :
Model : SW30HRLE-400
Hard fiberglass outer shell
Diameter : 8.0"
Length : 40"
Applied Pressure : 800PSI
Nominal Capacity in GPD : 7500
Maximum Pressure : 1200PSI
Weight : 40lbs
Stabilized salt rejection : 99.75%
Stabilized boron rejection : 91%
Maximum Operating Temperature : 113F (45C)
Maxium Feed Flow Rate : 85GPM
Maxium Pressure Drop : 15PSI
400 ft2 of active membrane surface area
FilmTec's superior automated manufacturing technology results in the most consistent performance element-to-element and year-after-year
May be cleaned over the widest pH range (pH 1 - 12) for the most effective cleaning
Untuk permintaan penawaran silahkan hubungi
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Kawasan Pergudangan Commpark – Kotawisata – Cibubur
Mobile : 081385066789