Hydranautics SWC5 MAX RO Membrane

Kami adalah importir distributor agen dan supplier Hydranautics SWC5 MAX RO Membrane terlengkap menyediakan berbagai kebutuhan spare part water treatment untuk keperluan industri harga dan kualitas terbaik .

Informasi produk lengkap Hydranautics RO Membrane

Description Hydranautics SWC5 RO Membrane

SWC5 membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in mega desalination plants. SWC5 membranes are available in two different types of variants, LD and MAX.

The MAX models have a 440 ft2 (40.9 m2) active membrane surface area. They provide excellent performance with high TDS and boron removal from warm waters.

Specification RO Membrane

Permeate Flow : 9,900 gpd (37.5 m3/d)
Salt Rejection : 99.8% (99.7% minimum)

Configuration : Spiral Wound
Membrane Polymer : Composite Polyamide
Active Area Membrane : 440 ft2 (40.9 m2)

Low differential LD Technology® models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment. They offer consistently low feed pressures and highest duration between two successive cleanings.

Product Use and Restrictions

Maximum Applied Pressure : 1200 psig (8.27 MPa)
Chlorine Concentration Maximum : < 0.1 ppm
Maximum Operating Temperature : 113 °F (45 °C)
pH Range, Continuous (Cleaning) : 2-11 (1-13)
Maximum Feedwater Turbidity : 1.0 NTU
Feedwater SDI (15 mins) Maximum : 5.0
Maximum Feed Flow : 75 gpm (17.0 m3/h)
Minimum Brine Flow : 12 gpm (2.7.0 m3/h)
Maximum Pressure Drop for Each Element : 15 psi (0.10 MPa)