AquaMatic K524 A125 Composite Valves

Filterpart Indonesia adalah importir, distributor, agen dan supplier produk AquaMatic K524 A125 Composite Valves terlengkap, dan menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan kualitas dan harga terbaik.

Kami sebagai bagian dari PFI Filtration, hadir sebagai stockiest semua kebutuhan spare part water treatment kebutuhan project WTP anda dengan kualitas terjamin.

Valve Aquamatic tersedia model :

K52 Series ½-inch to 2½-inch "Y" pattern diaphragm valves, glass-filled thermoplastic body and cap.
K53 Series 1-inch to 3-inch "Y"pattern diaphragm valves, intended for corrosive applications.

Description AquaMatic Valves K524 A125

Aquamatic Valve K52 A125

½-inch to 2½-inch "Y" pattern diaphragm valves
Glass-filled thermoplastic body and cap

AquaMatic Valve K53

1-inch to 3-inch "Y"pattern diaphragm valves
Glass-filled thermoplastic body and cap intended for corrosive applications

This product is manufactured in the United States of foreign and domestic parts.

Features and Benefits AquaMatic

Aquamatic K52 Series

Large Seat opening and high lift-disc for higher flow rates at a lower pressure loss
Separate flow and control chambers permit positive closing without springs; and only nominal cost for spring assist opening for low-pressure and self-draining applications
Semua material valve bagian dalam terbuat dari bahan composit
Pre-formed, stress relieved diaphragm minimizes fatigue, maximizes valve responsiveness and diaphragm lifetime
Designed for water treatment applications including those requiring acids, caustic and harsh chemicals that would rapidly corrode metal valves

Aquamatic K53 Series

Two dynamic o-rings on the shaft, with a vent in between the o-rings to prevent damage to the diaphragm
Female socket weld connectors for easy installation and the ability to remove the valve without disrupting the service piping
Cap held by a retaining ring, eliminates screws and nuts
No external metal parts to corrode in aggressive atmosphere
Valve bodies provided with molded pads can be used to support piping manifold
Reinforced diaphragms are pre-formed and stress relieved to maximize responsiveness and product life
Ideal for corrosive applications including deionized water, acids, caustic and harsh chemicals that would rapidly corrode metal valves
Can be actuated with either air or water as control fluid